Securing Your Home with Smart Z-Wave Smoke Detector
It is often a least recognized fact that one’s home is somewhat vulnerable not only to burglary but also to other diverse threats such as fire and smoke. Therefore, while automating your home for ensuring security even if you are away, it makes sense to include a smoke detector. There is no doubt that there are many such detectors in the market, but the latest Z-Wave smoke detector comes with a built-in wireless home automation protocol. This means that you can add this device to any Z-Wave-enabled automation system for triggering events like invoking the sound of an associated alarm if the smoke is detected in the detectable range.
Why Z-Wave to Escape Smoke Hazard
Z-Wave is truly an intelligent wireless technology that allows controlling devices and apps remotely. Its wireless protocol ensures low-latency exchange of small data packets at the rate of up to 100 Kbps, unlike IEEE 802.11-based wireless systems that are especially meant for high-bandwidth data transmissions. The technology operates in the sub-gigahertz range without interfering with other systems such as Wi-Fi and Bluetooth. This is exactly what makes the technology truly reliable, which is also evident through its smoke detector device.
Working of the Z-Wave Smoke Detector
The photoelectric device is a Z-Wave enabled device that is compatible with any Z-Wave network. It features a photo sensor that is non-radioactive to ensure reliable detection of smoke. All you have to do is simply install the device on the ceiling and follow the manual instructions. Once this is done, you are ready to use the early warning smoke system. There is also a test button along with a flashing LED light on the device, which shows you whether the smoke alarm is functioning well or not.
When the Z-wave smoke detector senses smoke, it can invoke a loud warning sound as per your settings. You can actually set the device to warn you by sound, phone, SMS, or e-mail. Further, the device is capable of trigger actions in other associated Z-Wave controllers or devices to activate the alarm. Apart from that, you can set the device to activate an alarm-scenario wherein you can switch all lights upon smoke is detection. This enables you to quit the house quickly when the smoke is sensed late at night. Even if you are away, the lights can grab the attention of the neighbors to protect your home.
In the system, the Z-Wave node functions as a repeater for re-sending the radio frequency signal for making sure that the signal is obtained by its targeted destination through routing over obstacles such as inactive or dead spots. In short, the working principle is to detect smoke at a certain density level and activate the sound followed by emitting signals to the linked devices for further actions. In this way, the device can save the life of your family before the smoke-ignited fire spreads. However, kindly note that the device cannot detect heat, flame, or gas.
Moreover, the device is highly resistant to tampering. This truly adds up to its reliability factor. Talking about the batteries, they are convenient to charge without detaching them from the device.
Z-Wave smoke detectors selected for you
To make your life easier, we have selected the best Z-Wave smoke detectors for you. The smoke detectors are directly available for shipping. Click on the image or text for more information. We also indicated whether used smoke detectors are available, which will save you a couple of dollars.